Storage - Stamina 55-6100U Owner's Manual

STORAGE

1.
STORING THE TRANSFORMER
The TRANSFORMER
storage. Please follow the following process:
1. Adjust the SUPPORT ARMS(47, 48) and ROTATING
ARMS(102) to the position shown in illustration 1. Remove
the EYEBOLT(39) from the BENCH LEG/w HOLE(34).
2. Remove the LOCKING PIN(37) from the SUPPORT TUBE(35)
on the Bench. Press down the SNAP PIN(95) on the
SUPPORT TUBE(35) and fold the bench down. Lock it in
position by inserting the LOCKING PIN(37) into the hole in the
SUPPORT TUBE(35). Turn the PULLEY FRAMES (15) to
face to the inside of the UPRIGHT FRAME(1).
3. Loosen the SECURING KNOB(41). Fold the Bench up to the
Upright Frame and lock it in position with the EYEBOLT (39)
and SMALL KNOB(40) as shown in illustration 3. The
EYEBOLT(39) must be attached to the Upright Frame as
shown. Hook the two HAND STRAPS(21) onto the tubes on
the BENCH FRAME(31) for more security.
WARNING:
1. When folding or unfolding the TRANSFORMER
1000 and make sure your hands are clear of any folding or pinch point.
2. Always make sure that the LOCKING PIN(37) and EYEBOLT(39) are properly installed.
3. Before folding the bench down, make sure that all three wheels are up in the non-rolling position.
TM
1000 can be folded as illustrated for easy
TM
1000
TM 1000, keep all children away from the TRANSFORMER
11
2.
3.
TM