Stamina 55-1529A Owner's Manual
  1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Home Gym
  5. 55-1529A
  6. Owner's manual
Stamina 55-1529A Owner's Manual

Stamina 55-1529A Owner's Manual

Home gym
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
!
WARNING
!
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
55-1529A
STAMINA PRODUCTS
CAUTION: 1. Weight on this product should not exceed 250 lbs.
MADE IN CHINA
2. Class H equipment: This equipment is for home
use only. It is not for commercial use.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
www.staminaproducts.com
2005, 08
2005 Stamina Products, Inc.

Advertisement

Table of Contents
loading

Related Manuals for Stamina 55-1529A

Summary of Contents for Stamina 55-1529A

  • Page 1 2. Class H equipment: This equipment is for home use only. It is not for commercial use. Product May Vary Slightly From Pictured. This Product is Produced Exclusively by 2040 N. Alliance, Springfield, MO 65803 Customer Service Number 1 (800) 375-7520 www.staminaproducts.com 2005, 08 2005 Stamina Products, Inc.

  • Page 2: Safety Instructions

    TABLE OF CONTENTS Page Page Safety Instructions Warranty Before You Begin Product Parts Drawing Hardware Identification Chart Parts List Assembly Instructions Notes Operational Instructions Fax/Mail Ordering Form Maintenance Instructions SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following safety instructions before Assisted Inversion Pro.
  • Page 3 CALL US FIRST THANK YOU FOR PURCHASING THE Assisted Inversion Pro To help you get started, we have pre-assembled most of your Assisted Inversion Pro at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual.

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Assisted Inversion Although Stamina tries to manufacture its products Thank you for choosing the with the finest materials and uses the highest Pro. We take great pride in producing this quality standards of manufacturing, occasionally a part that...

  • Page 5: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. After unpacking the unit, open the hardware bag and make sure that you have the following items: 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 100 110 120 130 140 150 MILLIMETERS Place washers, the end of bolts or screws on the...

  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 7 ASSEMBLY INSTRUCTIONS STEP 4 FOOTREST(13) HEIGHT ADJUSTMENT BEAM(12) BOLTS(M8 x 50mm) Attach the onto the with (47), WASHERS(M8)(51), NYLOCK NUTS(M8)(49). FOOTREST(13) FOOTREST(13) NOTE: The five holes in the allow the to be attached in three different positions. Start with the center position and adjust if necessary. Use the outer position if users are taller than average.
  • Page 8 ASSEMBLY INSTRUCTIONS Buckle Buckle STEP 7 SPRING PIN(22) MAIN FRAME(4). HEIGHT ADJUSTMENT BEAM(12) Screw the onto the Install the MAIN FRAME(4) SPRING PIN(22) MAIN FRAME(4) HEIGHT into by pulling the on the and inserting the ADJUSTMENT BEAM(12) SECURING KNOB(23) as shown. For added safety, thread the into the MAIN FRAME(4).
  • Page 9 ASSEMBLY INSTRUCTIONS Nylon Bed Shaft Shaft STEP 10: LINKAGES(7) LEFT RIGHT PIVOT ARMS(5, 6) BOLTS Attach the onto the with (M8 x 25mm)(46), WASHERS(M8)(51), NYLOCK NUT(M8)(49). DO NOT OVER TIGHTEN THE BOLTS. STEP 11: LEFT RIGHT PROTECTIVE COVERS(26, 27) BASE Slide the onto each side of the ASSEMBLY,...

  • Page 10: Height Adjustment

    OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS Do not use the Assisted Inversion Pro alone. Always have a helper available in case assistance is needed in recovering from the decline position. Make sure that the FOAM PADS(16) and HEEL HOLDERS(19) are holding your feet securely. Make sure that the HEIGHT ADJUSTMENT BEAM(12) is properly set for your height.
  • Page 11 OPERATIONAL INSTRUCTIONS HEEL HOLDER USE AND ADJUSTMENT Button Place your feet on the FOOTREST(13) with your ankles between the HEEL HOLDERS(19) and FOAM PADS(16). The HEIGHT ADJUSTMENT BEAM(12) includes a lever to grip and release your feet. Pull the lever toward you until your ankles are securely held between the HEEL HOLDERS(19) and FOAM PADS(16).

  • Page 12: Locking The Bed

    OPERATIONAL INSTRUCTIONS SUGGESTIONS FOR USE Begin slowly; invert only 15-20 degrees to begin with. Stay inverted only as long as you are comfortable. Return upright slowly. Make gradual changes: increase the angle only if it is comfortable. Increase the angle only a few degrees at a time.
  • Page 13 To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited warranty, you will be requested to return the product or part to us for free repair or replacement at our option.

  • Page 14: Product Parts Drawing

    PRODUCT PARTS DRAWING BACK FRONT...

  • Page 15: Parts List

    PARTS LIST DIAGRAM# PART NAME Front Frame Rear Frame Folding Linkage Main Frame Left Pivot Arm Right Pivot Arm Linkage Left Handrail Support Right Handrail Support Handrail Locking Knob Height Adjustment Beam Footrest Inner Pad Tube Outer Pad Tube Foam Pad Heel Holder Tube Heel Holder Bracket Heel Holder...
  • Page 16 NOTES...
  • Page 17 NOTES...

  • Page 18: Fax/Mail Ordering Form

    FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina has a Customer Service Department with a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064.

Table of Contents