Disconnecting Lan Cable; Cleaning The Computer; Moving The Computer - Toshiba Satellite A200 User Manual

Operating Basics

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.
Note: Make sure the LAN active indicator (amber LED) is out
before you disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer's LAN jack and pull out
the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with
your LAN administrator before disconnecting from the hub.

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust and
use care with liquids around the computer.
◆ Be careful not to spill liquids into the computer. If the computer does get
wet, turn the power off immediately and let the computer dry completely
before you turn it on again.
◆ Clean the computer using a slightly damp (with water) cloth. You can use
glass cleaner on the display. Spray a small amount of cleaner on a soft, clean
cloth and wipe the screen gently with the cloth.
CAUTION: Never spray cleaner directly onto the computer or let
liquid run into any part of it. Never use harsh or caustic chemical
products to clean the computer.

Moving the computer

The computer is designed for rugged durability. However, a few simple precau-
tions taken when moving the computer will help ensure trouble-free operation.
◆ Make sure all disk activity has ended before moving the computer. Check
the Disk indicator on the computer.
◆ If a CD/DVD is in the drive, remove it. Also make sure the drawer is
securely closed.
◆ Turn off the power to the computer.
◆ Disconnect the AC adaptor and all peripherals before moving the computer.
◆ Close the display. Do not pick up the computer by its display panel.
◆ Close all port covers.
4-40 User's Manual