Sound System; Tv Output Signal - Toshiba Satellite A200 User Manual

Troubleshooting

Sound system

Problem
No sound is heard

TV output signal

Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
No display
9-18
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure
the sound function is enabled and that settings
for I/O address, Interrupt level and DMA are cor-
rect for your software and do not conflict with
other hardware devices that you may have con-
nected to the computer.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness con-
trols on the external monitor.
Press hot keys Fn + F5 to change the display.
Refer to Chapter 5,
NOTE: If you turn the computer off in Resume
mode while the display is on TV, the computer
will select either the internal LCD or an external
computer CRT as the display device.
If problems persist, contact your dealer.
The Keyboard.
User's Manual