Lan; Wireless Communication Indicator - Toshiba Satellite A200 User Manual

Operating Basics

Wireless communication Indicator

The wireless communication indicator indicates the status of the wireless com-
munication functions.
Indicator status
Indicator off
Indicator glows
If you used the Task Bar to disable Wireless LAN, restart the computer or follow
the procedures below to enable the system to recognize Wireless LAN. Click
Start, open Control Panel, click System and Maintenance, click System, click
Device Manager, double-click Network Adapters, and rightclick the wireless
device then choose Enable.
It may not be possible to make a network connection to a specified network name
using the ad hoc network function.
If this occurs, the new network(*) will have to be configured for all computers
connected to the same network in order to re-enable network connections.
* Please be sure to use new network name.

LAN

The computer has built-in support for Ethernet LAN (10 megabits per second,
10BASE-T) or Fast Ethernet LAN (100 megabits per second, 100BASE-TX).
This section describes how to connect/disconnect to a LAN.
CAUTION: Do not install or remove an optional memory module
while Wake-up on LAN is enabled.
Note: The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this fea-
ture.
4-38
Indication
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction
Wireless communication switch is on.
Wireless LAN or Bluetooth is turned on by an appli-
cation.
User's Manual