Toshiba Satellite A200 User Manual page 153

If there are only 2 HDDs, the Boot Priority Options setting will be like the fol-
lowing.
You can override the settings and manually select a boot device by pressing one
of the following keys while the computer is booting:
U
N
1
2
C
This procedure does not affect the settings.
* In this computer, CD-ROM refers to the DVD-ROM, CD-R/RW or CD-RW/
DVD-ROM drives.
Note: PC card HDD boot is not supported.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the computer.
2. The selection method above does not change the boot priority
settings in HW Setup.
User's Manual
Selects the USB diskette drive.
Selects the Network.
Selects the primary HDD.
Selects the secondary HDD.
Selects the CD-ROM*.
HW Setup and Passwords
7-5