Number Of Rings - Panasonic KX-TG2383B Operating Instructions Manual

Preparing the Answering System

Number of Rings

You can select the number of times the unit rings before the Answering
System answers a call, from "2" to "7" or "Toll saver"
System needs to be on. Your phone comes from the factory set to "4".
Make sure the unit is not being used and the handset is lifted off the
base unit.
1 Press
(MUTE/FUNCTION)
Scroll to "Initial set" by pressing
2
and press
Ñ,
3 Scroll to "Set answering" by pressing
or .
Ñ
4 Press
á
Press
5
á
•The current setting is displayed.
Select the number of rings by pressing
6
or .
Ñ
•You can also select the number of rings by
pressing (0) (Toll saver*), or (2) to (7).
7 Press
á
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF)
*Toll saver
When you call the unit from outside:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
24
.
.
á
.
at "No. of rings".
(Save key).
*
. The Answering
or
Ö
Date and time
H
Initial set
--------------
Ö
Set tel line
H
Set answering
HS register
--------------
H
No. of rings
Recording time
Number of rings
GF
Ö
Number of rings
GF
.
:4
H
=Save
:Toll saver
H
=Save