Create Access Point Groups - Nokia 5230 User Manual

When you open one of the access point groups (
access point types:
indicates a protected access point
indicates a packet data access point
To create a new access point, select
available connections. After the search, connections that are already available are
shown and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, open one of the access point groups, and
select an access point. Follow the instructions from your service provider.
Connection name
●
Data bearer — Select the data connection type.
●
Depending on the data connection you select, only certain setting fields are
available. Fill in all fields marked with
can be left empty, unless your service provider has instructed otherwise.
To use a data connection, your service provider must support this feature, and if
necessary, activate it for your SIM card.

Create access point groups

Select Menu Settings
>
Some applications allow you to use access point groups for network connections.
To avoid selecting a single access point every time the device makes a network
connection, you can create a group that contains various access points to connect
to that network and define the order in which the access points are used.
To create a new access point group, select
destination.
To add access points to an access point group, select the group and
New access point. To copy an existing access point from another group, select the
group, tap the relevant access point if it is not already highlighted, and select
Options Organise
>
© 2010 Nokia. All rights reserved.
Access
— Enter a name for the connection.
Must be defined
and Connectivity
Copy to other
>
, ,
point. The device asks to check for
or with a red *. Other fields
> Destinations.
Options Manage
>
dest..
, ), you can see the
New
>
Options
>
119