Pair Devices - Nokia 5230 User Manual

4. If the other device requires pairing before data can be transmitted, a tone
sounds, and you are asked to enter a passcode. The same passcode must be
entered in both devices.
When the connection is established,
Tip: When searching for devices, some devices may show only the unique
address (device address). To find the unique address of your device, enter
*#2820#.

Pair devices

Select Menu Settings
>
To pair with compatible devices and view your paired devices, open the
devices tab.
Before pairing, create your own passcode (1 to 16 digits), and agree with the owner
of the other device to use the same code. Devices that do not have a user interface
have a factory-set passcode. The passcode is used only once.
1. To pair with a device, select
within range are displayed.
2. Select the device, and enter the passcode. The same passcode must be entered
on the other device, as well.
3. Some audio accessories connect automatically to your device after pairing.
Otherwise, to connect to an accessory, select
device.
Paired devices are indicated by
To set a device as authorised or unauthorised, select from the following:
Set as authorised
●
device can be made without your knowledge. You will not be asked for
authorisation or acceptance separately. Use this status only for your own devices,
such as your compatible headset or PC, or devices that belong to someone you
trust. indicates authorised devices in the paired devices view.
Set as unauthorised
●
separately every time.
124
and Connectivity
Options
in the device search.
— Connections between your device and the authorised
— Connection requests from this device must be accepted
Sending data is displayed.
> Bluetooth.
New paired device. Devices that are
>
Options
© 2010 Nokia. All rights reserved.
Paired
Connect to audio
>