Capture Images - Nokia 5230 User Manual

— Adjust light sensitivity (images only). Increase the light sensitivity in low light
conditions to avoid too dark images and blurry images. Increasing the light
sensitivity may also increase the image noise.
— Adjust contrast (images only). Adjust the difference between the lightest and
darkest parts of the image.
— Adjust sharpness (images only).
The screen display changes to match the settings you define.
The capture settings are shooting-mode specific. Switching between the modes
does not reset the defined settings.
If you select a new scene, the capture settings are replaced by the selected scene.
You can change the capture settings after selecting a scene if needed.
Saving the captured image may take longer if you change the zoom, lighting, or
colour settings.

Capture images

When capturing an image, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed image is lower than that of a non-zoomed
image.
● The camera goes into battery saving mode if there are no actions for about a
minute. To continue capturing images, select Continue.
To capture an image, do the following:
1. To switch from video mode to image mode, if necessary, select
2. To capture an image, press the capture key. Do not move the device before the
image is saved and the final image displayed.
To zoom in or out when capturing an image, use the zoom slider.
To leave the camera open in the background and use other applications, press the
menu key. To return to the camera, press and hold the capture key.
© 2010 Nokia. All rights reserved.
.
>
83