13
Frequently asked questions
Charging
The
icon is not blinking when the
f
handset is placed on the base
• Bad battery contact – move the handset
slightly
• Dirty contact – Clean the battery contact
with a cloth moistened with alcohol
• Battery is full – no need to charge
Calls
No dialling tone
• No power – check the connections. Reset the
phone: unplug and plug back in the mains
• Batteries are empty – charge the batteries for
at least 24 hours
• You are too far from the base – move closer
to the base
• Wrong line cable – use the line cable provided
• Line adaptor (when needed) is not connected
to the line cord – connect the line adaptor
(when needed) to the line cord
Poor audio quality
The base is too close to electrical appliances,
reinforced concrete walls or metal doorframes
– move the base at least one metre away from
any electrical appliances
N
The
icon is blinking
• Handset is not registered to the base
– register the handset to the base
• You are too far from the base – move closer
to the base
No ring tone
The ring tone is deactivated.
Increase the volume.
Frequently asked questions
7893 – Philips Twist 408 – 07 – 16.03.07
7893 – Philips Twist 408 – 07 – 16.03.07
Caller Line Identification (CLI) service
does not work
Check your subscription with Belgacom
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free
memory
Display
No display
• Try recharging or replacing the batteries.
• Try disconnecting and connecting the base
power supply.
Registration
Unable to register another handset
Maximum number of 5 handsets has been
reached.
The display shows SEARCHING. You must
unregister a handset in order to register a new
one.
Interference
Noise interference on your radio or
television
Your base or charger may be too close. Move it
as far away as possible.
29