Page 1
- the battery compartment cover, - the 5-pole telephone connector, - the batteries, - the user's guide. duo/trio - The additional handset(s), - The charger(s). Please read this guide carefully to get to know the main features of your Twist 387.
Page 2
- Take call - Loudspeaker on/off Long press: direct access to PhoneMail (1230) - Hang up - Correct / Delete a character - Return to previous menu - Lock the keypad (followed by pressing * Requires subscription to relevant Belgacom service.
Page 3
Twist_387_Couv_uk.qxp 13/07/2006 13:58 Page 3 Display and associated icons Received Calls list* Phonebook Base LEDs Loudspeaker on External call in progress On steady: power supply on (green) External call coming in Flashing: - incoming call, or call in progress Internal call in progress - registering handset Internal call coming in...
As with all radio communications, the signal quality will depend on the location and environment of the base and handset. Your Twist 387 must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids, or with aerosols.
Never dispose of batteries in a fire: they could explode. NAVIGATING THE MENUS AND SUBMENUS It's easy to configure and customise your Twist 387 using its scrolling menu feature. The bottom line of the display contains context icons or functions that can be activated using the three keys immediately underneath.
twist_387_uk.qxp 17/07/2006 07:35 Page 5 To confirm an option or return to the previous menu, press the corresponding context key: "OK" to confirm or "Back" to go back. Every time a setting is saved, you will hear a confirmation beep. Abbreviations used in menus and submenus Copy Unlock...
When an external call comes in, the screen displays "External Call" and the icon flashes. If you subscribe to Belgacom’s caller identification service, the caller’s name or number can be displayed and stored in the Received Calls list (see Chapter 7, “Identifying callers”).
(5 volume settings). USING THE LOUDSPEAKER (HANDS-FREE FUNCTION) The Twist 387 handset has a loudspeaker function: you can bring people around you in on the conversation and use the handset in hands-free mode by putting it down next to you.
To avoid accidentally pressing keys on the handset when it is not on its base, you can temporarily lock the keypad (you can still receive calls). To lock the keypad 17:26 Press * Press then to confirm, as prompted by the display. to lock icon (Unlock) appears on the display. * Requires subscription to Belgacom’s “Caller Name/Number Identification” service.
3. YOUR PHONEBOOK The Phonebook holds up to 100 entries. Each entry contains the name and number of a contact. Your Phonebook will be erased if you have to reset your Twist 387 (see § 6.2.5 “Restoring the factory settings”).
While you are on the line: Press under and scroll to the desired entry with the navigator or key in the 1st letter of the name. To quit the Phonebook, press under "Back". * Requires subscription to Belgacom’s “Caller Name/Number Identification” service.
Page 11 4. PHONEMAIL (1230) Belgacom offers a voicemail/answering service on its network. You can have your calls diverted to a voicemail box when you are absent or already on the line. New messages are indicated by an icon on the display.
Page 15
twist_387_uk.qxp 17/07/2006 07:35 Page 12 Use the navigator to scroll through the list of messages received. (From) Press under "OK" to confirm. 0141865000 08/12 16:58 Read the content of the selected message. Back Opt Del Use the navigator to scroll down to the rest of the message. When you reach the end of the message, you get a beep.
twist_387_uk.qxp 17/07/2006 07:35 Page 13 READING SENT OR SAVED SMSs Use the navigator to open the "TXT" menu. Press under "OK" to confirm. Use the navigator to select the relevant mailbox (if there is more than one) and press under "OK" to confirm.
"Save" to keep them. Note: The Twist 387 can store up to 50 SMSs (sent and received). When the memory is saturated, appears on the display, and you can no longer send or receive SMSs. Delete old SMSs from your Inbox and Outbox regularly.
Page 18
twist_387_uk.qxp 17/07/2006 07:35 Page 15 Table of available characters Upper case: € Space ¥ £ ¤ Ä Å Æ ∆ Φ É Γ Λ Ω Ñ Ö Ø Π Ψ Σ θ Ü Ξ ¡ ¿ & § " < >...
twist_387_uk.qxp 17/07/2006 07:35 Page 16 5.3.2 Sending an SMS Having written your SMS: Press under "Opt". Use the navigator to scroll through the options. The options: Send to Press under "OK" to confirm. Dial the number directly, or select it from the Received Calls list by pressing under , or from the Phonebook by pressing...
You only need to read this section if you have accidentally deleted the numbers for Belgacom’s SMS service centres. You can configure up to 4 different SMS servers. Server n° 1 is preset by default with Belgacom’s numbers: SMS Server 1...
twist_387_uk.qxp 17/07/2006 07:35 Page 18 5.4.2 Activating an SMS server You need to read this section if you have defined other SMS servers (see previous section). To activate one of the 4 SMS servers: Use the navigator to open the "TXT" menu and press under "OK"...
You may need to change this if you have more than one SMS-compatible telephone on the same line (see § 5.4.8). To check the sub-address used for the Twist 387’s common mailbox (0 by default): Use the navigator to open the "TXT" menu and press under "OK"...
twist_387_uk.qxp 17/07/2006 07:35 Page 20 User Box Press under "Save" to save all the settings. Saved Your personal mailbox is created. The name you defined for it will appear in the list If you press under "Save" without entering a name, password and sub-address, you get a long error beep and return to the list of personal mailboxes.
"OK" to confirm. Back Note: If you are subscribed to Belgacom’s "Caller Name/Number Identification" service, the time will be updated every time you receive a call. If the power supply is cut off, or if the batteries go flat or are replaced, the clock will need to be...
twist_387_uk.qxp 17/07/2006 07:35 Page 22 6.1.2 Adjusting the handset ringer volume Handset Ringer If you have more than one handset (see § 8 "Installing additional handsets or bases"), Volume you can use different volume levels to distinguish between internal and external calls. Back There are 4 volume settings.
twist_387_uk.qxp 17/07/2006 07:35 Page 23 BASE SETTINGS Use the navigator to scroll to "Base Settings" and press under "OK" to confirm. Base Settings Back Use the navigator to scroll through the available submenus: - Base Ringer Volume - Base Ringer Melody - Dial Mode - Recall - Restore Settings...
07:35 Page 24 6.2.4 Changing the PIN The system PIN is used for registering new handsets with your Twist 387 (see § 8 "Installing additional handsets or bases"). For greater confidentiality, you can change the default code (0000). PIN Code? Enter the 4 digits of the current PIN (0000 by default) and press under "OK"...
Page 28
17/07/2006 07:35 Page 25 Language English Handset name Belgacom Key tones Low battery alarm Out of range alarm Auto Answer Handset ringer volume (internal/external calls) Level 3 Base ringer volume Level 2 Earpiece volume Level 3 Loudspeaker volume Level 3...
"Unavailable" appears if the number cannot be transmitted by the network. You can view the Received Calls list during a call Press under and select the number you want using the navigator To quit the list, press under "Back". * Requires subscription to Belgacom’s “Caller Name/Number Identification” service.
- a long press (2 seconds) to delete the whole list. Confirm by pressing again under "Del". Keep the contents of the list by pressing under "Save". Press to quit the menu. * Requires subscription to Belgacom’s “Caller Name/Number Identification” service.
Page 28 8. INSTALLING ADDITIONAL HANDSETS OR BASES You can install up to 4 additional handsets on the main base of your Twist 387. You only need one telephone connection: the chargers of the additional handsets are simply plugged into the mains.
During a call, you can open the Phonebook (see § 3.5) and the Received Calls list* (see § 7.1). To answer a call, press * Requires subscription to Belgacom’s “Caller Name/Number Identification” service.
twist_387_uk.qxp 17/07/2006 07:35 Page 30 8.4.2 Transferring calls / 3-way conference You are on line with an external correspondent. To call an internal correspondent: Do a long press (2 seconds) on Enter the number of the handset you want to call. Your external correspondent is placed on hold.
twist_387_uk.qxp 17/07/2006 07:35 Page 31 9. TECHNICAL SPECIFICATIONS Standard DECT™* cordless digital telephone technology Free field range Up to 300 meters Indoor range Up to 50 meters Handset battery life (average 10 hours talktime values) 100 hours standby Number of handsets Up to 5 Number of bases Up to 4...
twist_387_uk.qxp 17/07/2006 07:35 Page 32 10. TROUBLESHOOTING ... As a general rule, try this first: remove the batteries from all the handsets in your installation and disconnect the power supply to the base. Wait for about 1 minute, then reconnect the base and reinstall the handset batteries. Problems Causes Solutions...
- if the Customer removes or tampers with the manufacturer's serial numbers and/or brand names on the terminal Equipment. Belgacom shall not be liable for any indirect or immaterial loss sustained by the Customer as a result of the malfunctioning of the terminal Equipment, such as any loss of production, revenue or contracts.
This device is designed to be connected to the Belgacom analogue network. Do not use your telephone to notify a gas leak when you are in the vicinity of the leak.