Microfibre Pad - Piranha NV-608 User Manual

•
To adjust the length of the Telescopic Tube, press the Extension Lock
downward. Whilst holding the lock down, move the upper section of the
tube up or down to your desired length then release the Lock Button.
Move the upper section of tube again until it "clicks" securely in to place.
Ref fig 1-D
•
To disconnect the Telescopic Tube from the Mop Head, swivel the lower
Cord Hook 180º upward, then press firmly on the spring pin while
simultaneously pulling the tube out of the Mop Head yoke. Ref fig 1-E.
7

Microfibre Pad

•
To fit the Microfibre Pad, lay one Microfibre Pad on a flat surface, with the
fastener strips facing upward.
Lift the steam mop up and position centrally over the Microfibre Pad and
then lower down. Ref fig 2-A
•
To remove, use your foot to press down on the Microfibre Pad release tab
while simultaneously pulling the Mop Head up off the pad.
CAUTION: Use care when handling a recently used Microfibre Pad, as it
may still be hot.
NOTE: Microfibre Pads are machine washable. Refer to "Maintenance"
section for Cleaning Instructions
Note: Ensure the Microfibre Pad is fitted before use.
Page 7 of 15