Operation Level - Omron E5CN User Manual

Operation Level

5-3

Operation Level

Power ON
Operation
Level
Press the O Key
for at least 1 s.
Initial Setting
Display this level to perform control operations on the E5CN. You can set
alarm values, monitor the manipulated variable, and perform other operations
in this level.
In the advanced function setting level, you can set a parameter to hide or
show the set points.
Adjustment
Level
Press the
O Key less than 1 s.
Press the O Key for at
least 1 s; display will flash.
C
25
Press the O Key for at least 3 s.
100
Control stops.
Level
Press the
O Key for less than 1 s.
This level is displayed immediately after the power is turned ON.
To move to other levels, press the O Key or the O and M Keys.
Communi-
cations
Setting
Level
Section 5-3
Control in progress
Control stopped
147