Entering The Password To Move To The Protect Level - Omron E5CN User Manual

Using the Key Protect Level
PF Key Protect
pfpt
off
4-9-2

Entering the Password to Move to the Protect Level

Operating Procedure
Operation Level
PV/SP
C
25
100
Protect Level
Move to Protect
pmov
Level
0
pmov
1234
Protect Level
Operation/Adjust-
oapt
ment Protect
0
Operation Level
PV/SP
C
25
100
Protect Level
Operation/Adjust-
oapt
ment Protect
0
• The default is OFF.
• The all protect indication (
set.
This protect level enables or disables PF Key operations.
Set value
OFF PF Key enabled.
ON PF Key disabled (Operation as function key prohibited).
• The default is OFF.
• Protect level can be moved to only by display the password display and
entering the correct password. (The user can set any password in the
Protect Level Password parameter. If no password is set (i.e., if the pass-
word is set to 0 in the Protect Level Password parameter), the password
input display to move to protect level will not be displayed and the protect
level can be moved to directly.
Use the following procedure to move to protect level.
■ Example with a Password of 1234
1. Press the O and M Keys simultaneously for at least the time set in the
Move to Protect Level Time parameter to move from the operation level
to the protect level.
2. Press the U Key to set the parameter to 1234 (password input).
3. Move to the Operation/Adjustment Protect parameter by pressing the O
or M Key or leaving the setting for at least two seconds.
■ Example with No Password Set
Press the O and M Keys simultaneously for at least the time set in the
Operation/Adjustment Protect parameter to move from the operation level to
the protect level.
When a password is not set, the Operation/Adjustment Protect parameter
will be displayed.
) will light when setting change protect is
Description
Section 4-9
97