STC-TGL2IR
Follow the instructions shown on screen from your
•
PC to completely install the driver and application
program.
If the existing DirectX version on your PC is lower
•
than version 8, and if you have problems viewing the
image with the standard software provided by
Microsoft, then you should install DirectX 8
Restart windows.
•
Turn off the camera
•
Connect your camera to the PC by the USB cable,
•
the PC will recognize the new device and set up the
configuration of the PC automatically. Front LCD on
your camera will show the word "USb".
NOTE: Windows 98 users must install camera driver
prior to connecting the USB cable.
www.wildviewcam.com
Toll Free 888-304-6125
19