Wildview Infrared Xtreme STC-TGL2IR User Manual page 12

STC-TGL2IR
4. Select Burst mode: Slide the switch to 1 / 2 / 3 / AVI
position.
5. Turn on the Camera to set the Date / Time stamp
a. Slide the power switch to the PIR position
b. Press and hold [SET] button for 2 seconds to
enter date & time setting mode.
c. Time and HH will blink. Press [UP] or [DN] to
adjust the hour
d. Press [SET] button to enter minute setting. Time
and MM will blink. Press [UP] or [DN] to adjust
the minute.
e. Press [SET] button to enter the month setting.
Date & MM will blink.
adjust month.
f. Press [SET] button to enter date setting. Date &
DD will blink. Press [UP] or [DN] to adjust date.
g. Press [SET] button to enter year setting. Date &
YY will blink. Press [UP] or [DN] to adjust year.
www.wildviewcam.com
Press [UP] or [DN] to
Toll Free 888-304-6125
12