Table of Contents
Advertisement
VIEWING VIDEO IMAGES
Connecting to video equipment that has DVI-D terminal
The DVI terminal of this projector makes it possible to project high-quality video images on screen by
connecting with video equipment that has DVI-D terminal. Also, because this projector is in conformity
with HDCP, it is possible to receive digital image signals encrypted from video equipment.
Video equipment that
has DVI-D terminal
•
Connect to DVI terminal with a commercially available DVI cable.
•
Select DVI-DIGITAL for switching input signals.
•
This projector is in compliance with only RGB signals, not with component video signals.
•
HDCP (High-band with Digital Content Protection) is one of encryption formats of digital image signals,
which has been developed by Intel Corporation to protect digital contents.
B. Plugging in the power cord
1
•
The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for
your country.
•
This projector uses the power plug of three-pin grounding type. Do not take away the grounding pin from the
power plug. If the power plug doesn't fit your wall outlet, ask an electrician to change the wall outlet.
•
The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply
using other voltages or frequencies than rated. If you use a power supply using other voltage than rated,
prepare an appropriate power cord separately.
18
To audio output
terminals
To DVI-D terminal
DVI cable (commercially available)
Plug the attached
power cable as it is.
Earthing terminal
2
Power cord
To audio input
terminals
To DVI terminal
1 Plug the attached power cord into the power cord
inlet of this projector.
2 Plug the other end of the power cord into a power
outlet.
Advertisement
Table of Contents
