Operational Range Of The Remote Control - Toshiba TDP-MT500 Owner's Manual

PREPARING YOUR PROJECTOR

Operational range of the remote control

Front of projector
Vertical directions
14
15˚ 15˚
Operate the
remote control
within a distance
of 7 m from the
projector, pointing
the light beam at
the remote control
photo-sensor
(front or rear) of
the projector.
15˚
15˚
Rear of projector
• Keep the remote control photo-sensor
away from direct sun light or fluorescent
lamp light.
15˚ 15˚
• Keep the remote control photo-sensor at
least 2 m apart from fluorescent lamps.
Otherwise, the remote control may mal-
function.
• If there is an inverter-operated fluores-
cent lamp near the remote control, the
remote control operation may become
unstable. On this occasion, stick the at-
tached protection sticker on the photo-
sensor that is closer to the fluorescent
lamp.
When operating the remote control, keep the distance
from the remote controller to the projector via the
screen within about 6m. The operable range of the
remote control, however, depends on the
characteristics of the screen.
15˚
15˚