Table of Contents
Advertisement
On the memory for projected image quality
This projector allows each item in the PICTURE menu and the PROFESSIONAL-PICTURE menu (except for
SET USER COLOR TEMP) to be adjusted to up to three kinds of favorable picture quality for each input signal.
Input that allows the setting
VIDEO
S-VIDEO
COMPONENT 1, 2
DVI-ANALOG/DIGITAL
To store the settings:
(Refer to Page 26 for how to set menus.)
1 Set an item in the PICTURE menu and the PRO-PICTURE menu.
2 Bring up the DISPLAY menu.
3 Select "SAVE" by pressing the {, } buttons.
4 Press the ENTER button.
The setting storage menu appears.
5 Select the memory where the setting is to be stored by pressing the {, } buttons.
6 Press the ENTER button.
The setting is stored in the memory.
To cancel the menus:
7 Press the MENU button.
To apply the set picture quality:
1. Press the MEMORY 1, 2, or 3 button.
The picture quality of the projected image comes to the set quality.
Adjusting projected images
To adjust brightness (CONTRAST and BRIGHTNESS):
1 Bring up the PICTURE menu.
2 Select "CONTRAST" or "BRIGHTNESS" by pressing the {, } buttons.
3 Adjust the selected item by pressing the $, % buttons.
To cancel the menus:
4 Press the MENU button.
CONTRAST ................... Adjusts the vividness of a projected picture image. Every time the % button is pressed,
BRIGHTNESS ................ Every time the % button is pressed, the images are made brighter. Every time the $
Number of settings
3
3
3
3
the images are made brighter and more vivid. Every time the $ button is pressed, the
images are made darker and less vivid.
button is pressed, the images are made darker.
USING THE MENUS
SAVE
MEMORY 1
MEMORY 2
MEMORY 3
PICTURE...
CONTRAST
BRIGHTNESS
0
0
29
Advertisement
Table of Contents
