Table of Contents
Advertisement
Chapter 3: Operating the IP Handset
To set the date and time
Note
The date and time is only maintained as long as the handset is
powered!
To set the date and time, do as follows:
1. From the Settings menu, select Date and
time.
2. If your handset is connected to a BGAN
terminal and you want to use the UTC
time received from the BGAN satellite,
select Use BGAN time. Then leave the
menu.
3. If you want to set the date and time
manually, clear the Use BGAN time box.
Then continue to the following steps.
4. To change the time, move to Time: and
press Edit. Then type in the new time and select OK. The new time is
activated immediately.
5. To change the date, move to Date: and press Edit. Then type in the new
date and select OK.
6. To switch the time format between 24h and 12h, use the keys and , or
select Edit and select the wanted format.
7. To change the time zone, use the keys and , or select Edit and select
the wanted time zone.
Note
Use the down key to scroll down to the last item in this sub menu.
To select the language
This setting is for future use. Only English language is currently available.
74
IP Handset menus
Advertisement
Table of Contents
