Network - TracPhone User Manual

Chapter 3: Operating the IP Handset

Network

Note
The Wireless network menu described in the following sections is
only available in the wireless handset. For the wired handset, go to
To select the IP address mode on page 67.
To connect the IP Handset to the wireless network
If your handset has been connected to the wireless access point before, it will
automatically attempt to establish a connection as soon as the access point is
within reach.
If it is the first time you connect the IP Handset to the wireless access point,
you need to manually connect to the access point.
To connect the IP Handset to the access point,
do as follows:
1. Start up your wireless access point.
2. Start up the IP Handset.
3. Enter the menu system and select
Network > Wireless network.
A list appears with all wireless access
points within reach, together with
previously connected access points.
• : the handset already has a profile
for this access point.
• : the access point uses encryption.
• : the access point does not use encryption.
The connected access point (if any) is always placed at the top.
62 IP Handset menus