How To Enter Text In The Ip Handset - TracPhone User Manual

Chapter 3: Operating the IP Handset
2. Select Night mode.
To set the IP Handset to automatic switch between day and night mode see To
set up the display on page 72.
To use stealth mode
Stealth mode is used when the IP Handset should not be noticed. In stealth
mode you can turn off all lights in the display and/or sounds for external
events. Note, however, that the keypad will still light up when you press a key.
To activate stealth mode, do as follows:
1. Select the left Options menu.
2. Select Stealth mode.
Note
Stealth mode is only activated for the items you have selected in the
menu Settings, Stealth. See To set up stealth mode on page 69.

How to enter text in the IP Handset

When entering your contacts in the IP Handset you use the keypad to enter the
names.
Press  before the alpha-numeric key to switch between lower case, upper
case and numbers.
There are 3 or 4 letters on each key. To obtain the next letter on the key, press
the key again.
To move the cursor in the text, use the arrow keys.
To delete the letter just before the cursor, press the left select key Clear. Hold
the key to delete all the text.
For a list of the key-functions in text-mode, see the table on page 29.
54 IP Handset functions