Making A Call Using A Bgan Terminal - TracPhone User Manual

Chapter 3: Operating the IP Handset
To end or reject a call
Press the on hook key
call.
When the handset is in hand-held mode, you can also end the call by placing
the handset in the cradle.

Making a call using a BGAN terminal

When making a call with the IP Handset using a BGAN terminal you use the
BGAN network and its functionality.
To make a call from a handset connected to a BGAN terminal
To make a call from a phone or handset connected to a BGAN terminal, dial
00 <country code> <phone number> followed by
Example: To call the number +45 39558800,
dial 00 45 39558800 followed by
Note
The default call type is set up in the web interface of the BGAN
terminal. However, you can select the call type for your call, using a
prefix.
Dial 1  before the number to make a Standard Voice call.
Dial 2  before the number to make a 3.1 kHz Audio call.
Example: Dial 2  004539558800 to make a 3.1 kHz Audio call to the
To make a call to a handset connected to a BGAN terminal
Note
By default all handsets connected to the terminal will ring on
incoming calls.
To make a call to a handset connected to the terminal, dial
46
to end an ongoing call or to reject an incoming
number +45 39558800.
IP Handset functions
or #.
or #.