Quinsyn Flush (Changed 02/04) - Quincy Compressor QSI Series Instruction Manual

Section VII - Compressor Fluids
QuinSyn Flush
QuinSyn Flush is a specially formulated synthetic fluid
capable of dissolving varnish and solubilizing sludge
from lubricating systems while they are operating.
QuinSyn Flush contains oxidation and rust inhibitors, and
can be used as a short-term fluid (for a maximum of 500
hours). It is fully compatible with mineral oils and
QuinSyn synthetic fluids, and is highly recommended for
use as a flushing fluid when converting to QuinSyn PG
from QuinSyn or QuinSyn IV.
Applications
Cleaning fluid for removal of varnish, dirt and oxidized
fluid from compressor fluid systems.
Flushing fluid when changing from other fluids to
QuinSyn fluids.
34
Typical Properties of QuinSyn Flush
Viscosity @ 100°F ASTM D445
Viscosity @ 210°F ASTM D445
Viscosity Index
Flash Point ASTM D92
Fire Point ASTM D92
Pour Point
Specific Gravity 60/60
Quincy Compressor-QSI ®
This page updated 02/19/04.
43.3 cSt.
5.6 cSt.
65
444°F
520°F
–45°F
0.965