Flash Key - Aastra 6867i User Manual

Configuring Softkeys

Flash Key

You can set a key to generate a flash event when it is pressed on the 6867i. You do this by setting the key to Flash. The IP
phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the call
is not on hold).
Configuring a Flash Key Using the Aastra Web UI
Aastra Web UI
1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Flash.
4. In the Label field, enter a label to display on the phone for the key.
Expansion Module Keys
5. Select from Key 1 through Key 16.
6. In the Type field, select Flash.
7. Click Save Settings.
76
41-001524-00 REV00 – 04.2014