What's On The Back Panel - Cisco Explorer 3350 User Manual

What's On the Back Panel?

T11500
1 IR
2 S-Video Out
3 Digital Audio
Output
4 Video Out
5 Audio Out
(LEFT and RIGHT) to a stereo receiver or TV with stereo outputs
6 Cable Out
7 Cable In
8 RF BYPASS
9 AC Outlet
10 AC Power Input
8
0003B4287797
SABDQXTL N0006246618
1 2 3 4 5
This connection is reserved for future use
Connect an S-Video cable to send an S-Video signal to your TV or VCR.
This signal is standard defi nition but higher quality than other standard
television connections
Connect an RCA cable to send a digital audio signal to a surround-sound
receiver or other digital audio device
Connect to the video input of TV or VCR
Connect RCA cables to Audio Out to send analog audio signals (left and right)
Connect a coaxial cable to Cable Out to send analog audio and video signals
to a TV or VCR. These signals are SDTV video and monaural audio
Connect the coaxial cable that delivers the signal from your cable service provider
Contact your cable service provider for more information
Connect the AC power cord from another device, such as a TV
Connect the power cord to deliver power to the 3350
6 7 8 9 10