Table of Contents
Advertisement
Step 8
Put grill body assembly (20) upon cart
assembly. Align the holes on each side of grill
body with the holes on each side cart, make
certain that each protruding part is inserted
into each hole in the control panel.
Screw a M6x16mm bolt (A) into each pre-drilled
hole. Tighten by screwdriver until secure.
Tighten the bolts with the screwdriver provided.
GSF2616JB
Owner's Manual
Step 7
Insert the axle (9) into the hole of the
right foot(6).
Put a wheel (8) on each end of the
axle. NOTE: protruding side of each
wheel must face the direction of grill
leg. Tighten each axle nut(D) toward
the wheel, make certain each axle nut
is flat with each end of axle.
Install a wheel cap (7) on each wheel.
10
Advertisement
Table of Contents
