Life & Home GSF2616JB Owner's Manual page 12

Step 10
Align the hole on tank support (19) with the holes
on the right cart beam.
Screw a M6x16mm bolt (B) into the pre-drilled
hole.
.
GSF2616JB
Owner's Manual
Step 9
Align the holes at the cart beam (17) with
the holes on the left cart
Screw a M6x16mm bolt (A) into each pre-
drilled hole.
Tighten by hand until secure.
Repeat the procedure for the right
cart. Go back and tighten with the
screwdriver provided.
11