5.6.4
E-MAIL
NOTE: If you want to use this function, you have to input the DNS address.
5.6.4.1
SEND E-MAIL
5.6.4.2
SMTP SETUP
In the LINK menu,
Move the cursor to E-MAIL using
buttons.
Press the ENTER button when the cursor is
on E-MAIL and the following screen appears.
In the E-MAIL menu,
Move the cursor to SEND E-MAIL using the
▲,▼
buttons and select "ON" using the
buttons to send e-mail when an event occurs.
In the E-MAIL menu,
Move the cursor to SMTP SETUP using the
▲,▼
buttons to input the e-mail sever
address to be used by DVR.
Press the ENTER button and the following
screen appears.
Select the characters using the ▲,▼,
, buttons and then press the ENTER
button. To exit the CHARACTER TABLE
screen, press the ESC button.
▲,▼