Note: MODE
1)
REC: Normal and Event recording.
2)
BACKUP: Only for backup.
5.5.1.2
STORAGE INITIALISE
5.5.2
CLOCK
Move the Cursor to EXTERNAL SDCARD
to see the following screen.
Users can have the facility of connecting
another
4
SDCARD
externally as shown above.
Users can select the MODE either as
BACKUP or RECORDING using
on the remote.
In the STORAGE menu,
Move the cursor to STORAGE INITIALISE
▲,▼
using the
buttons.
Press the ENTER button when the cursor is
on the STORAGE INITIALISE and the
following screen appears.
If you want to initialise the SD CARD, move
the cursor to "YES" and then press the
"ENTER" button.
If not, move the cursor to "NO" and then
press the "ENTER" button.
To exit this screen, press the ESC button.
To exit this HDD menu, press the "ESC"
button again.
In the SYSTEM menu,
Move the cursor to CLOCK using the
buttons.
Press the ENTER button when the cursor is
on CLOCK and the following screen
appears.
Memory
Cards
button
▲,▼