5.4.7
GPS - Only Available with the MDVR4SD-PRO Model
X-THRESHOLD: X-Threshold values are automatically varied when there is any event but the default value is 1.
Y-THRESHOLD: Y-Threshold values are automatically varied whenever any event occurs but the default value
is 0.
Z-THRESHOLD: Z-Threshold values also changes when any event occurs but the default value is 4.
SPEED PARAMETER: The parameter values shown below may change depending on the acceleration speed
of the vehicle.
a)
SPEED LIMIT
b)
LENGTHY STOP
c)
EXCESSIVE BREAK
d)
EXCESSIVE SPEED
In the EVENT menu,
Move the cursor to "GPS" using the
buttons.
Press the ENTER button when the cursor is
on "GPS" and the following screen appears.
Users can change the SHOCKSENSOR to
either "ON" or "OFF" by pressing the
button.
▲,▼