Table of Contents
Advertisement
5.5.5.1
PASSWORD CHECK
NOTE: In cases where the PASSWORD CHECK is ON, only ADMIN and MASTER can enter
the ADVANCED SETUP MENU.
5.5.5.2
SET PASSWORD
NOTE:
Only the 0~9 number buttons can be used to setup the PASSWORD.
The ADMIN default is 11111111, USER1 is 22222222, USER2 is 33333333, USER3 is 44444444,
and USER4 is 55555555.
If you forget the admin password, please contact your administrator.
CAUTION: It is always advisable to change the default passwords when commissioning
the system. .
In the ADVANCED SETUP menu,
Move the cursor to PASSWORD CHECK
▲,▼
using the
buttons.
Select ON or OFF using the
OFF is selected the password menu will not
work.
In the ADVANCED SETUP menu,
Move the cursor to SET PASSWORD using
,▼
the ▲
buttons.
Press the ENTER button when the cursor is
on SET PASSWORD and the following
screen appears.
Select the administrator or User 1~4 to
change
the
password
"ENTER" button. The following screen is
displayed.
Insert the desired password (eight digits)
marked _ _ _ _ _ _ _ _ besides NEW
PASSWORD using the CAMERA/ NUMBER
INPUT buttons.
And then re-type the eight numbers of the
NEW PASSWORD in the eight spaces
marked _ _ _ _ _ _ _ _ beside RE-TYPE,
using
the
CAMERA/ NUMBER INPUT
buttons to verify the password. To exit this
menu, press the ESC button.
button. If
and
press
the
Advertisement
Table of Contents
