Firmware Upgrade - Genie CCTV V1.0 H.264 MDVR4SD User Manual

NOTE: It's only possible to copy and upload the menu setting from the front USB port.
5.5.6

FIRMWARE UPGRADE

NOTE: Upgrade the firmware with the USB port located on the DVR Front Panel.
CAUTION: WHEN YOU ARE IN FIRMWARE UPGADE DO NOT DOWN POWER THE UNIT. WAIT FOR
THE SYSTEM TO COMPLETE UPGRADE BEFORE DISCONNECTING POWER.
In the SYSTEM menu,
Move the cursor to FIRMWARE UPGRADE
▲,▼
using the , buttons.
Press the ENTER button when the cursor is
on FIRMWARE UPGRADE and the following
screen appears.
If you want to update firmware using the
USB port, move the cursor to "YES" and
press the ENTER button. If not, move the
cursor to "NO" and press the ENTER button.
,▼
Use the ▲ buttons to move the cursor.
To exit the FIRMWARE UPGRADE screen,
press the ESC button