5.6.1.7
BACKUP IP SERVER
NOTE: DHCP is a protocol for assigning dynamic IP addresses to devices on a network.
** Please note that this unit does not support PPPOE networks.
5.6.2
RS485
5.6.2.1
SYSTEM ID
In the NETWORK menu,
Move the cursor to DHCP using the ▲
buttons.
Select "ON" using the
Move the cursor to BACKUP IP SERVER
,▼
using the ▲
buttons.
Input the backup server IP address using the
buttons to change the value and the
,▼
▲
buttons to move the cursor.
In the LINK menu,
Move the cursor to the RS485 using the
▲,▼
buttons.
Press the ENTER button when the cursor is
on RS485 and the following screen appears:
▲,▼
Use the
buttons to choose the item
and use the
buttons to set the data
value.
To exit the RS485 menu, press the ESC
button.
,▼
buttons.