Subscribe to Our Youtube Channel
Related Manuals for Genie CCTV HDVRQ Series
Summary of Contents for Genie CCTV HDVRQ Series
- Page 1 HDVRQ HDVRQ Series Series HDVRQ HDVRQ Series Series Digital Video Recorder USER’S MANUAL...
-
Page 2: Compliance Notice Of Fcc
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions 13. Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to All the safety and operating instructions should be read before the qualified service personnel under the following conditions: appliance is operated. A. -
Page 4: Table Of Contents
INDEX 1. SAFETY CAUTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.1 Power Source - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1.2 Installation... - Page 5 INDEX 5.2 DEVICE SETUP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5.2.1 CAMERA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3.2.2 PTZ...
- Page 6 INDEX 6. SEARCH - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6.1 Search Screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6.1.1 Search Menu...
-
Page 7: Safety Cautions
1. SAFETY CAUTIONS ※ F o l l o w t h e s e i n s t r u c t i o n s t o k e e p t h e u s e r s a f e a n d p r e v e n t p r o p e r t y d a m a g e . ※... -
Page 8: Cleaning And Usage
1 . 3 C l e a n i n g a n d U s a g e - r e l a t e d ⑥ W h e n c l e a n i n g t h e p r o d u c t , u n p l u g t h e p o w e r ①... -
Page 9: Outline
2. OUTLINE 2.1 Functions This DVR provide superior video image quality on Live view and Playback. • Pentaplex Operation Performance (Live, Recording, Playback, Backup, Network) • Up to maximum 16 channel composite input ports depending on model. • Various Recording mode. (Manual / Schedule / Event) •... -
Page 10: System Organization
2.2 System Organization C M S C A M E R A H D M I / V G A K E Y B O A R D M O N I T O R C O N T R O L L E R V i d e o S M S C A M E R A... -
Page 11: Dvr Organization
3. DVR ORGANIZATION 3.1 Front Panel Description NOTE: Turn on the DVR after connecting the power cord, camera input and monitor completely POWER/HDD/NETWORK LED REMOVABLE HDD RACK Menu DVD_RW Jog / Shuttle Number(1~0) Direction... -
Page 12: Real Panel
3.2 Rear Panel 6 11 HD-SDI camera Power On/off HDMI Monitor HDMI SPOT AC Inlet Switch Input RS-485, 2 Alarm out, 16 Sensor Input, 16 Audio in VGA out Network 1 Out HD-SDI SPOT 4 e-SATA RS-232... -
Page 13: Remote Controller
3.3 Remote Controller ICON FUNCTION HOT KEY POWER ON/OFF PLAYBACK & PAUSE LATEST SEARCH | | ▶ | | ▶ | | ▶ | | ▶ STOP TO LIVE ■ ■ ■ ■ REWIND FIRST SEARCH ◀ ◀ ◀ ◀ ◀... -
Page 14: Live
4. LIVE 4.1 Live Screen Execution Information Message Camera Name Record Status Icon Live Screen PTZ Control Information Screen Screen Expand/Reduction Backup Progress Window Status(%) Current Date and Current Channel Current Event Information Time Information Icon Icon Sequence Icon - Record Icon (Red) - Video-loss Icon When record in live screen. -
Page 15: Top Menu
4.1.1 Top Menu I n l i v e s c r e e n , i f ▲ b u t t o n o f t h e r e m o t e c o n t r o l l e r o r f r o n t p a n e l i s p r e s s e d , o r i f t h e m o u s e c u r s o r i s p l a c e d o v e r t h e e n d o f t h e t o p a r e a , t h e t o p m e n u i s a p p e a r e d . -
Page 16: Cameo Menu
4.1.3 CAMEO Menu In live screen, if the ENTER button of the remote controller or front panel is pressed, a blue square cursor will be appeared. If the ENTER button is pressed again, the CAMERA menu will be appeared. CAMEO CHANGE : The live camera can be changed to the selected channel. ▪... - Page 17 PTZ : PTZ Camera should be installed otherwise the PTZ menu is not activated. ▪ ▪ ▪ ▪ The following picture will be appeared when select PTZ menu. Using Mouse : On the above menu, when click the right button of mouse, the control screen for Menu, ※...
- Page 18 - SPEED SETUP : Set the PTZ camera speed. ( 1 to 8) NOTE: If the mouse is used to move the PTZ camera, the movement speed depends on the position of the mouse. As the mouse pointer moves away from the center, speed becomes faster. - PRESET SETUP : Set the preset position.
-
Page 19: Setup
5. SETUP In this category, there are SYSTEM, NETWORK, DEVICE, RECORD and EVENT. [ S E T U P ] [ S E T U P ] [ S E T U P ] [ S E T U P ] O n t h e T o p m e n u , s e l e c t t h e m e n u i c o n . -
Page 20: General
5.1.1 GENERAL [SYSTEM] LANGUAGE : Select the language. LANGUAGE : Select the language. ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ (English, Germany, French, Spanish, Japanese, Chinese, Italian, Russian, Dutch and Korean) KEY TONE : Turn on/off the buzzer sound of key. ▪... - Page 21 5.1.1 GENERAL [DATE / TIME] DATE FROMAT : Select the data format. ▪ ▪ ▪ ▪ (YY/MM/DD) / (MM/DD/YY) / (DD/MM/YY) ▪ ▪ ▪ ▪ TIMEZONE : Select the timezone and DST. The city which don’t use DST is set to [OFF] automatically. DATE DISPLAY : Display date on live screen or not.
-
Page 22: Alarm Out
5.1.2 ALARM OUT SIGNAL : Select on/off to use alarm by channel. ▪ ▪ ▪ ▪ ALARM SET TEST : Check the alarm connection whether it works properly or not. ▪ ▪ ▪ ▪ Press the [SET] button then alarm device will be operated. ALARM CLEAR TEST : Press the [CLEAR] button then alarm device will not be operated. - Page 23 [CHECK / USB] RECORD START TIME : Display the earliest recorded data information. RECORD START TIME : Display the earliest recorded data information. ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ RECORD END TIME : Display the latest recorded data information. DISK CHECK : Check the data from the earliest recorded to the latest recorded.
-
Page 24: Monitor
5.1.4 MONITOR HDMI : Select the resolution for connected monitor. ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ FILTER : BORDER COLOR : Change the border color. ▪ ▪ ▪ ▪ ALPHA BLENDING : Set the transparency of menu. ▪ ▪ ▪ ▪ (Set 1 to 20 and 20 is closer to the more transparent.) DISPLAY POSITON : ▪... -
Page 25: Accout
5.1.5 ACCOUNT Add / delete any user and give permission freely. ※ When add new user, have to input new password. ※ When delete user, confirm again. NOTE: ( Default ADMIN password is 1), Initial user name can be modified but can not delete. CAUTION: Default Admin account must not be deleted before add new user. -
Page 26: Config
5.1.6 CONFIG SLOT : Select the slot to load or save on DVR memory. ▪ ▪ ▪ ▪ DEFAULT : Change factory default setting. ※ DATE : Display the latest saved date. ▪ ▪ ▪ ▪ LOAD : Load the saved data. ▪... -
Page 27: Shutdown
5.1.7 SHUTDOWN RESTART : Restart the DVR. ▪ ▪ ▪ ▪ SHUTDOWN : Shutdown the DVR. ▪ ▪ ▪ ▪... -
Page 28: Device Setup
5.2 DEVICE SETUP In this category, there are Camera, PTZ, Spot, Sequence and Private Zone setting. Select the [DEVICE] Menu. 5.2.1 CAMERA CAMERA LABEL : Select the camera label of live screen. ▪ ▪ ▪ ▪ (ALL / NUMBER / NAME / OFF) NAME : Change the camera name. -
Page 29: Ptz
If select the camera name, the virtual keyboard will be appeared. Max camera name should be less than 11 character. [ V i r t u a l K e y b o a r d ] 5.2.2 PTZ [PTZ] PORT : Select the Baud Rate for using PTZ camera. -
Page 30: Spot
5.2.3 SPOT CAMERA : Select the camera for display on spot monitor. DEFAULT : Select the camera for display on spot monitor when sequence is off. SEQUENCE : Select On/Off for sequence screen. DWELL : Select the interval time to move next channel. The max value is 256 sec. POPUP : Select On/Off for pop-up screen when event is occurred. -
Page 31: Sequence
5.2.4 SEQUENCE PAGE DWELL TIME : Select the dwell time to move next channel. CAMEO DWELL TIME : Select the dwell time for CAMEO sequence. NOTE: CAMEO sequence means selected camera is rotated in select cameo of division screen. NOTE: CAMEO sequence means selected camera is rotated in select cameo of division screen. Camera image which is shown on the other CAMEO of division screen is not included in CAMEO sequence. -
Page 32: Private Zone
5.2.5 PRIVATE ZONE ZONE ENABLE : Select On/Off to use. (LIVE mode/ SEARCH mode) ▪ ZONE COLOR : Select the color to hide. ▪ ZONE : Select the zone to hide. ▪ (When select the ZONE button, the camera image will be appeared. (When select the ZONE button, the camera image will be appeared. -
Page 33: Event Setup
5.3 EVENT SETUP In this menu, there are Motion, Alarm in, Video Loss, System and Display setup. Select the [EVENT] menu. 5.3.1 MOTION [INPUT] ACTIVE : Select On/Off to activate motion. ▪ LEVEL : Select the sensitive for motion trigger. (Select 1 to 5 level) ▪... - Page 34 AREA SETUP ▪ In the Area setup, the Red square is shown at the top left side of the screen. If select the OK button, the dot color will be changed to Green. A motion area can be selected by the direction buttons. NOTE : When the status is Red square, can move any direction to select.
- Page 35 [ACTION] RECORD : Select the channel for record. ▪ ALARM : Select On/Off for alarm. ▪ BUZZER : Select On/Off for buzzer. ▪ PRESET : Set the preset number. PRESET : Set the preset number. ▪ ▪ (When motion is triggered, the PTZ camera move to the set preset number position) E-MAIL : Select On/Off for e-mail notification.
-
Page 36: Alarm In
5.3.2 ALARM IN TIP: If select the ACTIVE+ / TYPE+ menu, can change all setting at once. [INPUT] ACTIVE : Select On/Off to activate alarm. ▪ NAME : Type any name. ▪ TYPE : Select the alarm type. (NO : Normal Open / NC : Normal Close) ▪... -
Page 37: Video Loss
5.3.3 VIDEO LOSS TIP: If select the ACTIVE+ menu, can change all setting at once. [INPUT] ACTIVE : Select On/Off to activate. ▪ [ACTION] RECORD : Select On/Off for record. ▪ ALARM : Select On/Off for alarm. ▪ BUZZER : Select On/Off for buzzer. ▪... -
Page 38: System
5.3.4 SYSTEM [WARNING] CHECK INTERVAL : Select the check interval. (Select 1 hour to 24 hour) ▪ DISK WARNING : Select how to give a warning if disk error. (OFF, POPUP, POPUP + BUZZER) ▪ THRESHOLD : Critical value for Warning ▪... -
Page 39: Display
[E-MAIL] – Select option On/Off for e-mail notification. POWER / MENU / LOGIN FAIL / DISK FULL / LOG IN / SMART ▪ 5.3.5 DISPLAY DISPLAY : Select display time by second. (Select 0 to 100) ▪ EVENT MESSAGE : Select On/Off to display event message. ▪... -
Page 40: Record Setup
5.4 RECORD SETUP Select the [RECORD] menu. In this menu, there are Setup, Record, Pre/Post, Audio, Panic Setup 5.4.1 SETUP & RECORD SETUP MODE : Select the record schedule. (CONTINUOUS / SCHEDULE) ▪ [CONTINUOUS] DAY TIME : Select the day time. (The night time is changed automatically according to the day time zone) ▪... - Page 41 [SCHEDULE] Set 3 different recording setup by day and time. (SET1, SET2, SET3) ▪ This is related with [RECORD] menu so [CUSTOM] mode should be matched with [RECORD] menu. TIP : For SET1, SET2, SET3 recording, change the setting [SETUP MODE] to [CONTINUOUS] and enter to the [RECORD] menu then change the setting.
-
Page 42: Schedule & Record
5.4.2 EVENT PRE / POST PRE RECORD : Sets Pre-event recording time ( Max 60 second ) ▪ POST RECORD : Sets Post-event recording time ( Max 100 second ) ▪ 5.4.3 AUDIO RECORD : Select On/Off for audio recording by channel. ▪... -
Page 43: Manual
5.4.4 PANIC FPS : Select the recording frame by each channel. ▪ Quality : Select the resolution by each channel. ▪ AUDIO : Select On/Off for audio recording by each channel. AUDIO : Select On/Off for audio recording by each channel. ▪... -
Page 44: Network Setup
5.5 NETWORK SETUP In this menu, there are Network, Serial, DDNS, E-mail setup. Select the [NETWORK] menu. 5.5.1 LAN [SERVER] DHCP : Select On/Off for dynamic IP. ▪ If Dynamic IP is OFF, DVR get IP address from router automatically. HOST NAME : Type any Host name. - Page 45 [SERVER2] DHCP : Select On/Off for dynamic IP. ▪ IP ADDRESS : Type IP address. (Available when DYNAMIC IP is OFF) ▪ NETMASK : Type Subnet mask. (Available when DYNAMIC IP is OFF) ▪ [CLIENT] CLIENT ACCESS : Select client access options. ( ALL / RANGE ) ▪...
-
Page 46: Serial
5.5.2 SERIAL [RS-232 INPUT SETUP] SERIAL TYPE : Select external device. ▪ MODEL : Select the protocol to use. ▪ PORT : Select the Baud Rate / DATA bit / Parity / Stop Bit. ▪ [RS-485 INPUT SETUP] SERIAL TYPE : Select external device. ▪... -
Page 47: Ddns
5.5.3 DDNS DDNS SERVER : Select DDNS server. ( ezddns.com / dyndns.com / changeip.com ) ▪ HOST NAME : Input the host name from the registered on DDNS server. ▪ USER NAME : Input the user name from the registered on DDNS server. USER NAME : Input the user name from the registered on DDNS server. -
Page 48: E-Mail
5.5.4 E-MAIL [ADDRESS] SEND E-MAIL : Select On/Off for use. ▪ SCHEDULE : Set the usage time. (From : Start time / To : End time) ▪ E-MAIL ADDRESS : Input the E-mail address to receive. ▪ [SERVER] MAIL SERVER : Select the mail server. (SMTP server / DVR System) ▪... -
Page 49: System Information
5.6 SYSTEM INFOMATION In this menu, there are System Log, Status, Version. On the Top menu, select the [INFORMATION] menu icon. 5.6.1 SYSTEM LOG Check the system log by the left, right direction button. ▪... -
Page 50: Status
5.6.2 STATUS [DISK] Display HDD Status. ▪ CHECK SMART NOW : Check the smart. ▪ SMART INFORMATION : Show the smart information. SMART INFORMATION : Show the smart information. ▪ ▪ [RECORD] Display RECORD Status. ▪... - Page 51 [AUDIO] Display AUDIO Status. ▪ [CAMERA] Display CAMERA Status ▪...
-
Page 52: Version
5.6.3 VERSION Display DVR version and information. ▪... - Page 53 6. SEARCH [ S E A R C H ] [ S E A R C H ] [ S E A R C H ] [ S E A R C H ] O n t h e T o p m e n u , s e l e c t t h e m e n u i c o n .
-
Page 54: Search
6.1 Search Screen Execution Information Message Camera Name Search Information Icon Search Icon Search Screen Repeat Time Information Screen Expand/Reduction Window Backup Progress (%) Recorded Audio Search Date/Time Information Icon 6.1.1 Search Menu W h e n m o u s e c u r s o r i s p l a c e d o v e r o n t h e b o t t o m s i d e , t h e S e a r c h m e n u i s a p p e a r e d . Division Screen Play 1 frame backward Fast forward play... -
Page 55: Calendar Search
6.1.2 CALENDAR SEARCH a. Select the data by the direction button. - Recorded data is displayed the orange color. b. Select the time by the direction button. - After select hour, minutes will be appeared. NOTE: The time graph color is different by the recording mode. Continuous Recording = Blue, Audio Recording = Light Blue, Event Recording = Red. -
Page 56: Event Search
6.1.3 EVENT SEARCH DATA : Select Date to search. ▪ MOTION : Select On/Off event for search. ▪ ALARM IN : Select On/Off event for search. ▪ VIDEO LOSS : Select On/Off event for search. ▪ SELECT CAMERA : Select the camera for search. SELECT CAMERA : Select the camera for search. -
Page 57: Overlapped List
6.1.4 OVERLAPPED LIST If user change the time or applied DST (Daylight Saving Time), there will be overlapped data. ▪ After select the list, if select the [PLAY] button, can search [QUICK SEARCH] or [EVENT SEARCH]. ▪... -
Page 58: Panorama Search
6.1.5 PANORAMA SEARCH During normal search, press the [PANORAMA] button. ▪ By mouse, click the right mouse button and click the [PANORAMA] Search. ▪ Playback with frame by frame. ▪ 6.1.6 SMART SEARCH During normal search, press the [SMART] button. ▪... -
Page 59: Section Repeat Search
6.1.7 SECTION REPEAT SEARCH During normal search, press the [LOCK] button. ▪ When press one time, the start position is set, press one more time, the end position is set. By mouse, click the below red circle button. ▪ Only playback the set section repeatedly. ▪... - Page 60 ※ ※ ※ ※ Button Explanation in Search mode Remote Controller or Front button ▪ Button Explanation SEARCH Display the [SEARCH] menu. Cancel the Search mode or return to the live screen. ENTER Select the CAMEO menu. FAST REVERSE When reverse play, up and down play speed. FAST FORWARD When forward play, up and down play speed.
-
Page 61: Backup
7. BACKUP [ B A C K U P ] [ B A C K U P ] [ B A C K U P ] [ B A C K U P ] O n t h e T o p m e n u , s e l e c t t h e m e n u i c o n . -
Page 62: Playback With Backup Data
7.1 Playback with backup data After backup, the DVR Player is copied with data. After backup, the DVR Player is copied with data. ▪ ▪ Backup data only can be played on DVR Player at PC. ▪ Can export to JPEG still shot. ▪... -
Page 63: Appendix
8. APPENDIX 8.1 Trouble Shooting SYMPTOM MEASURES If the power LED is not lighted, check the below items. No Power - Check the power plug and outlet. (Refer to the [Cautions for safety] - Connect the power cord to the power connector of DVR properly. - Connect the camera cable to the DVR port properly. - Page 64 - C h e c k t h e b a t t e r y p o l a r i t y . - C h e c k t h e r e m o t e c o n t r o l l e r I D . [ R e m o t e C o n t r o l l e r C o n f i g u r a t i o n ] [ R e m o t e C o n t r o l l e r C o n f i g u r a t i o n ] [ R e m o t e C o n t r o l l e r C o n f i g u r a t i o n ]...
Need help?
Do you have a question about the HDVRQ Series and is the answer not in the manual?
Questions and answers