Scan; Scan Operation; Deleting Nuisance Modes - Motorola MTX150 User Manual

SCAN

SCAN OPERATION

The scan feature allows you to monitor activity
on different conventional or trunked modes by
scanning a scan list of modes. This list can be
programmed by your authorized Motorola
dealer.
The table below lists the types of automatic
scanning (autoscan) operations available
depending on radio model.
Trunking
Comprises modes that are all
Priority Monitor
from the same trunked system.
(MTX150 only)
Conventional Comprises conventional-only
Scan modes.
Comprises conventional modes
Talkgroup
and trunked modes from more
Scan
than one trunking system.
The MTX150 radio supports both priority and
non-priority scanning. When priority scan is
enabled, a scan list can have one mode
assigned as the first priority mode, and a
second as the second priority mode.
Automatic scanning (autoscan) can be
programmed by your authorized Motorola
dealer. If autoscan is enabled for a mode, your
radio begins scanning using the mode's scan
list whenever you select that mode. The radio
will continue autoscanning until you select a
mode that does not have autoscan enabled.

Deleting Nuisance Modes

When the radio scans to a mode you do not wish
to monitor (nuisance mode), you can temporarily
delete that mode from the scan list.
When your radio is locked on the mode to
1
be deleted, press the nuisance-mode delete
button (programmable by your authorized
Motorola dealer).
A valid-keypress chirp is heard, indicating
2
that the mode has been deleted.
The radio continues scanning the remaining
3
modes in the list.
To resume scanning the deleted mode, you
4
must leave and reenter scan operation.
33
English