Attaching the Side Connector Cover
1
Place the loop (attached to the side con-
nector cover) over the antenna; then slide it
downward until it touches the top of the
radio.
2
Insert the tab on the top of the cover into
the slot above the connector.
Position the cover over the connector and
3
align the thumbscrew with the threaded
hole in the radio.
4
Tighten the thumbscrew to hold the cover in
place. Do not overtighten the thumbscrew.
26
English
TURNING RADIO ON OR OFF
Antenna
Loop
Slot
Thumbscrew
Turn the radio on by rotating the volume control
clockwise. The radio goes through a power-up
self check and, if it passes the check, a good-
power-up, high-pitched tone sounds to indicate
that the radio has passed the self check.
If the radio fails the self check, a bad-power-up,
low-pitched tone will be heard. Turn the radio off,
check the battery, and turn the radio back on. If
the radio still does not pass the self check, a
problem exists in the radio. Contact your
authorized Motorola dealer.
ON
OFF