Notice For Disc Writing And Printing - Epson PP-100II User Manual

Disc producer
Hide thumbs Also See for PP-100II:
Table of Contents

Advertisement

Notice for Disc Writing and Printing

❏ Store the stacker out of direct sunlight. A warped or damaged stacker may stop the
product from operating normally.
❏ Use only CDs/DVDs/BDs labeled as suitable for printing, for example "Printable on the
label surface" or "Printable with ink jet printers."
❏ For more details on handling discs and for guidelines for writing data to discs, refer to
your CD/DVD/BD documentation.
❏ When using the product for the first time after storing it for a long time or after an error,
missing dots or ink stains may appears and print quality may be reduced. If publishing
a large number of discs, check print quality by publishing one disc in advance. If any
dots are missing, run head cleaning.
❏ When writing and printing discs separately, it is recommended to print after writing. If
you write discs after printing, ink may cause discs to stick to each other and result in a
transport error, or dirt, stains, or scratches on the disc may cause a write error.
❏ Printing on rib area may result in ink sticking, disc sticking, or color loss.
❏ Try to test print on a spare disc, and check the printed surface after waiting for one full
day, especially before printing a large number of discs.
❏ After printing the first copy, check the print quality to see if any dots are missing.
❏ Before using or touching the printed surface of your discs, make sure they are
completely dry and keep them out of direct sunlight.
❏ If the printed surface is sticky even after it has dried, do the following.
1. Change label type.
2. Change color saturation level.
3. Change the disc.
❏ Moisture on the printable surface may cause smearing.
❏ If you print on the matte label type of Epson specified discs, set Label Type to CD/DVD
Premium Label.
❏ When using Epson specified discs, only [1] can be selected for Print Mode setting.
❏ Reprinting on the same disc may not improve the print quality.
❏ Be sure to clean the inside of the stacker before using if there is any dirt.
❏ Please check disc before printing, as the size of the receptor may vary.
28
Publishing Discs

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Disc producer pp-100ii

Table of Contents