Replacing An Ink Cartridge - Epson PP-100II User Manual

❏ You cannot continue printing with an ink cartridge after it has reached its replacement
time, even if the other cartridges still contain ink. Before printing, replace the used
cartridge.
❏ Do not turn off the product or open the ink cartridge cover while loading ink (Power light
is flashing). Opening of covers may cause the ink to reload, resulting in more of the ink
being consumed. Also, normal printing may be disturbed.
❏ If the ink cartridge is not recognized even if it is correctly installed, dirt may be attached
to the green circuit board. Remove the cartridge, wipe the circuit board with a soft cloth
and install it again.
❏ Color adjustment of the product is based on the use of genuine Epson ink cartridges.
Use of non-genuine ink cartridges may result in reduced print quality and the product
performance may not be optimum.
❏ When the Ink lamp is flashing or lit, the ink cartridge is not correctly installed. Check that
it is installed correctly.
❏ If installing an ink cartridge does not provide normal printing, press the Cleaning button
for 3 seconds. If it does not resolve the problem, repeat the process for 1 or 2 times.
❏ By turning off the product using the Power button, print head is automatically covered
to prevent ink from drying. When not in use after installing ink cartridges, make sure to
turn off using the Power button. Do not unplug the power cord or shut down the breaker
while the power is on.
❏ When moving or transporting the product after installing ink cartridges, move or
transport with ink cartridges installed.

Replacing an Ink Cartridge

Note:
❏ Do not open the ink cartridge package until you are ready to install it in the product.
❏ To confirm the status of each ink cartridge, see the following section:
& See "Using EPSON Total Disc Monitor" on page 113.
Replacing Ink Cartridges
91