Rotary Dial Settings; Power Up - Bosch 560 DDC Quick Start Manual

Quick Start Guide

ROTARY DIAL SETTINGS

Verify hardware configuration for rotary dials matches
corresponding application.
The rotary dials provide the controller address for
identification over a network.
The top dial represents the tens digit of the address,
and the bottom dial represents the ones digit for the
address. See example below:
In the example to the left,
the rotary dial is set to 69.

POWER UP

Apply power to the unit and verify via the power LED
that the controller is receiving 24VAC.
Quick Start Guide Subject to change without prior notice
Rotary Dial Settings
8733914716 DDC (2014/02)
| 7