8.3.
How to Clear User Setting
Units are reset to the Factory settings by this operation (Erase stored Phone numbers, Caller list and etc.)
Note:
• The reset menus differ depending on the following operations.
• This operation should not be performed for a usual repair.
8.3.1.
Resetting both base unit and handset
Note:
(*1) Refer to Registering a Handset to a Base Unit (P.21).
• Handset registration will not be reset.
8.3.2.
Resetting only handset
The only handset is reset by doing the following steps
Note: (*2)
• The registration of the base unit and the handset are cancelled.
• If the handset needs to be registered to the base unit, refer to Registering a Handset to a Base Unit (P.21).
• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
• Caller ID data will not be reset.
8.3.3.
Delete all handset registration of base unit
to
.
33
KX-TG8201CB/KX-TG8202CB/KX-TGA820CB