Table of Contents
Advertisement
Outside Port
Notice: After finish setting, click the Add button to add new mapping table; click the Delete
button to delete the selected mapping table.
Shows the outside WAN port IP address and the inside LAN port IP address.
Outside IP
Inside IP
Click the Add button to add new table; click the Delete button to delete the selected mapping
table.
Notice: 10M/100M adaptive means the network card, and other equipment physical consultations
speed, testing speed under bridge mode near to 100M, in order to ensure the quality of voice and
communications real-time performance, we made some sacrifices of NAT under the transmission
performance. T ransmit with full capability only when system is idle , so can not guarantee that the
transmission speed reach to 100M.
4.3.6.4. VPN Config
This web page provides us a safe connect mode by which we can make remote access to enterprise
inner network from public network. That is to say, you can set it to connect public networks in
different areas into inner network via a special tunnel.
Set the WAN port of the NAT mapping
Set the outside Wan port IP address of DMZ.
Set the inside LAN port IP address of DMZ
- 54 -
Advertisement
Table of Contents
