Digital Map Configuration - Realtone WSS530 User Manual

Server
Auto handdown The phone will hang up and return to standby automatically at hands-free mode
Set Add/Delete Black list. If user does not want to answer some phone calls,
Black List add these phone numbers to the Black List, and these calls will be rejected.
x and . are wildcard. x means matching any single digit. for example, 4xxx
expresses any number with prefix 4 which length is 4 will be forbidden to
dialed out
DOT (.) means matching any arbitrary number digit. for example, 6. expresses
any number with prefix 6 will be forbidden to dialed out.
if user wants to allow a number or a series of number incoming, he may add
the number(s) to the list as the white list rule. the configuration rule is
-number, for example, -123456, or -1234xx
Means any incoming number is forbidden except for 4119
Note: End with DOT (.) when set up the white list
Set Add/Delete Limit List. Please input the prefix of those phone numbers
Limit List which you forbid the phone to dial out. For example, if you want to forbid
those phones of 001 as prefix to be dialed out, you need input 001 in the blank
of limit list, and then you can not dial out any phone number whose prefix is
001.
x and . are wildcard. x means matching any single digit. for example, 4xxx
expresses any number with prefix 4 which length is 4 will be forbidden to
dialed out
. means matching any arbitrary number digit. for example, 6. expresses any
number with prefix 6 will be forbidden to dialed out.
Notice: Black List and Limit List can record at most10 items respectively.

4.3.4.3. Digital Map Configuration

This system supports 4 dial modes:
1). End with "#": dial your desired number, and then press #.
2). Fixed Length: the phone will intersect the number according to your specified length.
3). Time Out: After you stop dialing and waiting time out, system will send the number collected.
4). User defined: you can customize digital map rules to make dialing more flexible. It is realized
by defining the prefix of phone number and number length of dialing.
In order to keep some users' secondary dialing manner when dialing the external line with PBX,
phone can be added a special rule to realize it. so user can dial a number as external line prefix and
get the secondary dial tone to keep dial the external number. After finishing dialing, phone will
send the prefix and external number totally to the server.
For example, there is a rule 9, xxxxxxxx in the digital map table. After dialing 9, phone will send
the secondary dial tone, user may keep going dialing. After finished, phone will call the number
which starts with 9; actually the number sent out is 9-digit with 9.
- 40 -