Table of Contents
Advertisement
Field name
VLAN Enable
VLAN ID Check Enable
Voice/Data VLAN
differentiated
DiffServ Enable
DiffServ Value
Voice 802.1P Priority
Data 802.1P Priority
Voice VLAN ID
Data VLAN ID
NOTICE：
1）Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will
use the Voice VLAN ID as the tag.
2) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disables the
DiffServ, then system will not distinguish the voice and data, all packets will use the Voice
VLAN ID as the tag.
3) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enables the
DiffServ, then system will distinguish the voice and data and add the VLAN ID each other.
QoS Configuration
Before select it to enable VLAN, you need enable Bridge mode in
LAN config.
Enable VLAN ID check by selecting it. After enable VLAN ID
check, if VLAN ID of a data package is not the same with the
phone's or a data package do not have VLAN ID, the data package
will be discarded.
After enable VLAN, system will set packets with different type of
VLAN ID. Undifferentiated means after using VLAN, both VoIP
packets and other data packets will use the voice VLAN ID; tag
differentiated means after using VLAN, VoIP(signal and voice)
packets will add voice VLAN ID, and other data packets will add
data VLAN ID; data untagged means after using VLAN, only VoIP
packets will add voice VLAN ID. Other data packets will not use
VLAN.
Select it or not to Enable or disable DiffServ.
Set DiffServ value, the common value is 0x00.
Specify 802.1P Priority of voice/signal data package.
Set 802.1p of data VLAN. Non-VoIP data (such as http, telnet, ping
etc) will use this value to set VLAN package.
Set VLAN ID of voice/signal data package.
Set 802.1q of data VLAN ID. Non-VoIP data (such as http, telnet,
ping etc) will use this value to set VLAN package.
- 24 -
explanation
Advertisement
Table of Contents
