Dial Peer - Realtone WSS530 User Manual

If user makes the above configuration, after user dials 11 digit numbers started with
from 135 to 139, the phone will send out 0 plus the dialed numbers automatically.
Use this phone you can realize dialing out via different lines without switch in web interface.
Field name
Phone number
Destination
Port
Alias

DIAL PEER

There are two types of matching conditions: one is full matching,
the other is prefix matching. In the Full matching, you need input
your desired phone number in this blank, and then you need dial the
phone number to realize calling to what the phone number is
mapped. In the prefix matching, you need input your desired prefix
number and T; then dial the prefix and a phone number to realize
calling to what your prefix number is mapped. The prefix number
supports at most 30 digits
Set Destination address. This is optional config item. If you want to
set peer to peer call, please input destination IP address or domain
name. If you want to use this dial rule on SIP2 line, you need input
255.255.255.255 or 0.0.0.2 in it.SIP3 into 0.0.0.3
Set the Signal port, the default is 5060 for SIP.
Set alias. This is optional config item. If you don't set Alias, it will
show no alias.
- 35 -
explanation