Table of Contents
Advertisement
Answer With Single Codec Enable/Disable the function when call is incoming, phone replies
Auto TCP
Enable Strict Proxy
Enable GRUU
Enable Display name
Quote
4.3.3.2. IAX2 Config
Field name
Register Status
IAX2 Server Addr
IAX2 Server Port
Account Name
Account Password
Phone Number
Local Port
Voice Mail Number
Voice Mail Text
will refresh the SIP sessions.
SIP message with just one codec which phone supports.
Set to use automatically TCP protocol to guarantee usability of
transport as message is above 1300 byte
Support the special SIP server-when phone receives the
packets sent from server， phone will use the source IP
address, not the address in via field.
Set to support GRUU
Set to make quotation mark to display name as the phone sends
out signal, in order to be compatible with server.
IAX2 Config
Shows if the phone has been registered the IAX2 server or not.
Input your IAX2 server address.
Set your IAX2 server port, the default is 4569.
Input your IAX2 register account name.
Input your IAX2 register password.
Input your assigned phone number (usually it is same you're your
IAX2 account name).
Set your local sport，the default is 4569.
Specify the voice mail's number.
Specify the voice mail's name.
- 32 -
explanation
Advertisement
Table of Contents
