Table of Contents
Advertisement
Field name
First Codec
Second Codec
Third Codec
Forth Codec
Fifth Codec
Input Volume
Hands-free Volume
G729 Payload Length
Handdown Time
Ring Type
Output Volume
Ring Volume
G722 Timestamps
G723 Bit Rate
Default Ring Type
Signal Standard
VAD
4.3.4.2. Call Service
In this web page, you can configure Hotline, Call Transfer, Call Waiting, 3 Ways Call, Black List,
white list Limit List and so on.
DSP Configuration
The fist preferential DSP codec: G.711A/u, G.722, G.723, G.729
The second preferential DSP codec: G.711A/u, G.722, G.723, G.729
The third preferential DSP codec: G.711A/u, G.722, G.723, G.729
The forth preferential DSP codec: G.711A/u, G.722, G.723, G.729
The fifth preferential DSP codec: G.711A/u, G.722, G.723, G.729
Specify Input (MIC) Volume grade.；
Specify Hands-free Volume grade
Set G729 Payload Length
Specify the least reflection time of Handdown, the default is
200ms.
Select Ring Type
Specify Output (receiver) Volume grade.
Specify Ring Volume grade
160/20ms or 320/20ms is available
5.3kb/s or 6.3kb/s is available
Set up the ring by default
Select Signal Standard.
Select it or not to enable or disable VAD. If enable VAD, G729
Payload length could not be set over 20ms.
- 38 -
explanation
Advertisement
Table of Contents
