Wega Espresso Coffee Machine Use And Maintenance Manual page 87

The first item of data is shown, which consists of the number of SERVINGS made on the first key of the
first group. Or the display shows:
(Group 1, button 1)
and the number of SERVINGS performed. Example:
• Using the keys KPIU and KMENO it is possible to read the servings provided by the other keys of all of the groups.
First all the keys of a group are displayed in order, then you move on to the next group.
During scanning, those keys which were not used to provide any servings are skipped.
By pressing KPIU when reading is in the last position available or by pressing KMENO when reading is
in the first position available, the display shows the message "End".
The highest number of servings which can be counted for each key is 65535.
After that number, counting resets to zero.
Each dose is counted at its start, including any doses which may have been carried out during dose programming.
• To end the servings reading phase, press the key KMODE.
The display will go back to showing the message "Count":
• To go back to the normal indication, press KMODE repeatedly:
If no key is pressed during reading for 30 seconds, reading is aborted and the machine
reverts to the previous status.
espresso coffee machine - servings count
R
CNS 7
English