Grounding Instructions - Hunter TABLE FAN Owner's Manual

GroUNDING INStrUCtIoNS

this appliance is for household use
only and may be plugged into any
120-volt aC electrical outlet (ordi-
nary household current). Do Not
use any other type of outlet.
!
WarNING
this unit is suitable for grounded
receptacle use only.
the cord has a grounded plug as
shown in figure 1. an adapter, as
shown in figure 2, is available for
connecting three-blade grounding-
type plugs to two-slot receptacles.
the green grounding lug extending
from the adapter must be con-
nected to a permanent ground such
as a property grounded outlet box.
the adapter should not be used if
a three-slot grounded receptacle is
available.
Grounded
Plug
Grounding Pin
fIGUrE 1
4
Grounded Outlet
Box Cover
LINE CorD SafEty tIpS
1. NEVEr pull or yank on the cord
or the appliance.
2. To insert plug, grasp it firmly
and guide it into the outlet.
3. to disconnect the appliance,
grasp the plug and remove it
from the outlet.
4. Before each use, inspect the
line cord for cuts and/or abra-
sion marks. If any are found,
the appliance should be
serviced and the line cord re-
placed. please return it to our
Service Department or to an
authorized service representa-
tive.
5. NEVEr wrap the cord tightly
around the appliance, as this
could place undue stress on the
cord where it enters the appli-
ance and could cause it to fray
and break.
6. Do Not operate appliance if
the line cord shows any dam-
age, if the appliance works
intermittently or stops working
entirely.
Adapter
Metal
Screw
Grounded Outlet
Grounding
Cover Box
Means
fIGUrE 2
44800-01 11/29/2007